Industrial, Commercial & Specialist Coatings
Supplier of International Protective Coatings
Our product range includes:
- Quick drying enamels
- Hammer finish
- QD primers
- Zinc Phosphate primers
- Zinc rich
- Etch primers
- Mordant solution (T wash)
- M.I.O. (micatious iron oxide)
- QD semi gloss primer/finish
- One coat finish
- Hi build vinyl
- Chlorinated rubber
- Stoving finish
- Heat resistant aluminium
- Bitumen paint
- Skip paint
- Single pack polyurethane
- Two pack epoxies
- QD road line paint
- Industrial thinner
- Gun wash
- QD enamels
- One coat finish primers
- Universal primers
- Chassis black
- Two pack primers and finish paints
- Silver wheel paint
SINGLE PACK AIR DRYING FINISHES |
|
| Q.D. ENAMEL | Fast drying spray enamel for general purpose use. |
| 1 PACK POLYURETHANE | High quality 2 hour dry high gloss finish for transport and machinery. |
| O. C. F. | Quick drying anticorrosive gloss finish ideal for skips and containers |
| ZINFOS 490 | Spray or brush anticorrosive self priming mid sheen finish. |
SINGLE PACK PRIMERS |
|
| Q.D. PHOSPHATE PRIMER | High build matt anticorrosive primer |
| HB 420 PRIMER | General purpose primer with a low sheen finish. |
| Q.D.SEMI GLOSS PRIMER | Quick dry primer with high sheen finish. |
| FAST PRIMER | High quality non sag phosphate primer. |
| ZINC RICH | Liquid zinc used as touch up on galvanised steel. |
ETCH PRIMERS |
|
| 2 PACK WASH PRIMER | 2 pack etch primer for use on non ferrous metals. ideal pre treatment for powder coating. |
| SINGLE PACK ETCH | Black or grey recommended for galvanised garage doors. |
| T.WASH ( MORDANT) | Acid based etch for galvanised steel. |
SPECIAL COATINGS |
|
| HIGH BUILD VINYL | Low sheen tough one coat plastic like finish. Ideal for gates railings and some plastic coated buildings. Good adhesion to clean steel and galvanised surfaces. |
| CHLORINATED RUBBER | Good resistance to mild acids and alkalis. Ideal for use in areas of high humidity. |
| HAMMER FINISH | Quick drying gloss hammer finish best applied over zinc phosphate primer for better corrosion resistance. |
| PROMASTIC 600 | 2 pack epoxy sheen finish for concrete floors, structural steel, valves and pumps. No primer required and will cure at very low temperatures. |
Coating Systems Ltd
2C Eagle Road, Quarry Hill Industrial Park, Ilkeston, Derbyshire, DE7 4RB
Tel: 0115 930 6246 | Fax: 0115 930 7419
Privacy Policy | Created by Ilkeston Web Design